How do I set a Static IP Address for my ZC350

How do I set a Static IP Address for my ZC350

First install the USB driver and connect the printer to your PC with a USB cable.
The driver can be found here
 

Wired connection settings are configured while the printer is connected via USB to prevent possible loss of communication.


Select your printer and open printing preferences.


Select advanced settings

Then Connectivity / Wired Network



The Connectivity tab enables the user to configure the respective network options, either wired (Ethernet) or wireless (Wi-Fi when the wireless option has been fitted).
The Status (top) section of the Wired Network window shows either Not Connected or Connected, the IP address of the printer (if connected), and the MAC address.

Settings (bottom section)

  1. Turn DHCP off to set a static IP address. (default is On)
  2. Turn SNMP off if you do not want the printer to be discoverable on the network. (default is On)
  3. IPv4 Address: Displays the IP address of the printer (if connected).
  4. Subnet Address: Displays the subnet the printer resides on.
  5. Gateway: Displays the gateway.


Note  IPv4, subnet, and gateway settings are configurable only when DHCP is turned off.


    • Related Articles

    • How do I set a Static IP Address for my ZC100

      First install the USB driver and connect the printer to your PC with a USB cable. The driver can be found here  Wired connection settings are configured while the printer is connected via USB to prevent possible loss of communication. Select your ...

    • How do I fix the retransfer film peeling off cards?

      Fixing issue with retransfer film peeling off card: Set the transfer temp offset to 0 (zero) Printing preferences > Tool Box > Advanced settings Set the film transfer cooling level to 4 Printing preferences > Tool Box > Advanced settings NOTE: AFTER ...

    • What do I do if Asure ID takes too long to open up?

      What do I do if Asure ID takes too long to open up? Asure ID 7/2009 takes too long to open up. With Asure ID 7 the database loads all records into memory up to a default value of 5000 records to allow for quick response in pulling up these records ...