How do I adjust the print speed on my Lemur Printer?

How do I adjust the print speed on my Lemur Printer?

Please follow the enclosed steps to increase print speed on your printer.

  1. Depress both the MENU and TEST buttons while turning on the printer. Keep both buttons depressed unit OPERATOR MENU appears in the LCD window or the display starts scrolling
    through different topics.
  2. Using the MENU button scroll down to the PRINT SPEED?
  3. Using the CHOICE button select the numeric value you want. Once you have done this press the TEST button. The display will show EXIT AND SAVE, press the TEST button again and the
    printer should reset itself.
Numeric Value for printer speed:
0= fastest (we don’t recommend this setting)
7= slowest

If the printer doesn’t have a LCD display then the below command may be sent to the printer instead. This command only need to be sent to the printer once to take permanent effect and the printer will
reset upon receipt of said command. The DOWNOADING SOFTWARE COMMANDS section of the Lemur user manual (www.bocasystems.com/documents/lemur_manual.pdf ) provides download procedures.

PRINT SPEED COMMAND - <ps#>
This command sets the printing speed of the ticket. The values can range from 0-7. The slowest speed is 7 and the default value is 3. The slower the speed the darker the printing. The command
only needs to be sent once to take permanent effect and the printer will reset upon receipt of said command.


    • Related Articles

    • How do I calibrate an Evolis printer?

      Sensor Adjustment: Open the Print Center Right Click on the Evolis Printer Select Properties Click on the “Maintenance” Tab Select “Printer Commands Prompting” Remove all cards from the printer Type “Sa” without the quotes into the command area and ...

    • How do I adjust Logitech Webcam image quality?

      Adjusting image quality Use the following steps to adjust the image quality on your webcam: Launch Logitech Webcam Software Start > Programs > Logitech > Logitech > Logitech Webcam Software Click the Quick Capture button. Click the Controls button. ...

    • How do I check the warranty on my Magicard printer?

      To check the warranty on your Magicard printer, go to this URL: https://support.magicard.com/ and then enter your printers serial number.

    • How do I check the warranty on my Zebra printer?

      To check the warranty on your Zebra printer, go to this URL: https://supportcommunity.zebra.com/s/warrantycheck?language=en_US and then enter your printers serial number.

    • How do I use a custom color profile for my Evolis printer?

      Open the “Control Panel” and select “Devices and Printers” Right click on your Evolis Printer and choose “Printer Properties” Select the “Color Management” Tab Click on the “Color Management” button. Select your Evolis printer from the drop down menu ...